Hydraulic rubber hose HAGRIX DN10 1SC 180 bar 1SC0600HAG
Specification
-
VAT:23,00%
-
Weight:0,251kg
-
Net Weight:0,251kg
-
UPC Code:2010001855354
-
Symbol:1SC0600HAG
-
Norm / Type of hose:1SC EN857
-
Minimum temperature [C]:-40
-
Maximum temperature [C]:120
-
Bending radius [mm]:60
-
Outside diameter [mm]:15.7
-
Bursting pressure [bar]:720
-
Recommended ferrule:H001C-06
-
Crimping diameter:19.5
-
Nominal inside diameter [mm]:10
Product Description
180 bar in tight machine installations
When a 1SN DN10 hose does not fit the installation or has to run on a bend that is too tight, a compact 1SC hose is the answer. HAGRIX 1SC0600HAG handles 180 bar working pressure with a minimum bend radius of 60 mm – much smaller than that of a 1SN DN10 hose (130 mm to EN 853).
Technical data
| Parameter | Value |
|---|---|
| Standards | EN 857 1SC, ISO 11237 1SC |
| Inside diameter | 3/8" (9.5 mm), DN10 |
| Outside diameter | 15.7 mm |
| Working pressure | 180 bar (2610 psi) |
| Burst pressure | 720 bar (10,440 psi) |
| Minimum bend radius | 60 mm |
| Weight | 0.248 kg/m |
| Operating temperature | -40…+120 °C (intermittent up to +135 °C); water-based fluids -40…+70 °C; water 0…+70 °C |
| Tube | synthetic rubber, extruded in one piece without joints |
| Reinforcement | 1 steel wire braid |
| Cover | synthetic rubber resistant to abrasion, oils, fuels and weather |
| Fluids | mineral and biological oils, water-glycol, water, lubricants |
| Ferrule | HAGRIX H001C-06 (no-skive) |
Applications
- agricultural machinery and tractors
- forklifts and material handling equipment
- construction machinery, e.g. excavators
- cranes and hydraulic booms
- pressure and return lines in power hydraulics
Crimping
Use the HAGRIX H001C-06 ferrule – a no-skive ferrule for 3/8" hoses. The outer cover does not need to be removed before crimping, which shortens assembly time.
What the code 1SC0600HAG means
- 1SC – compact hose with 1 steel wire braid
- 06 – inside diameter 3/8" (9.5 mm)
- 0 – standard version (no product name)
- 0 – standard wrapped cover
- HAG – HAGRIX brand
Frequently asked questions
Can a 1SC hose replace a 1SN DN10 hose?
In terms of working pressure, yes – both are rated at 180 bar. The 1SC hose has a smaller bend radius (60 mm instead of 130 mm), so it performs better in tight installations. Always match the ferrule to the hose type – for 1SC0600HAG use H001C-06.
Can the hose be used for water?
Yes, at temperatures from 0 to +70 °C. For water-based fluids (e.g. water-glycol) the range is -40…+70 °C.
When should I choose a 2SC hose instead of 1SC in size DN10?
The single-braid 1SC0600HAG hose is rated at 180 bar. If the system needs higher pressure, choose the two-braid 2SC0600HAG hose: 330 bar with a bend radius of 65 mm. Both use the same H001C-06 ferrule.
Substitutes
