Hydraulic rubber hose HAGRIX DN08 1SC 215 bar 1SC0500HAG
Specification
-
VAT:23,00%
-
Weight:0,203kg
-
Net Weight:0,203kg
-
UPC Code:2010001855347
-
Symbol:1SC0500HAG
-
Norm / Type of hose:1SC EN857
-
Minimum temperature [C]:-40
-
Maximum temperature [C]:120
-
Bending radius [mm]:55
-
Outside diameter [mm]:13.5
-
Bursting pressure [bar]:850
-
Recommended ferrule:H001C-05
-
Crimping diameter:16.8
-
Nominal inside diameter [mm]:8
Product Description
215 bar in tight machine installations
When a 1SN DN08 hose does not fit the installation or has to run on a bend that is too tight, a compact 1SC hose is the answer. HAGRIX 1SC0500HAG handles 215 bar working pressure with a minimum bend radius of 55 mm – much smaller than that of a 1SN DN08 hose (115 mm to EN 853).
Technical data
| Parameter | Value |
|---|---|
| Standards | EN 857 1SC, ISO 11237 1SC |
| Inside diameter | 5/16" (8 mm), DN08 |
| Outside diameter | 13.5 mm |
| Working pressure | 215 bar (3118 psi) |
| Burst pressure | 850 bar (12,325 psi) |
| Minimum bend radius | 55 mm |
| Weight | 0.203 kg/m |
| Operating temperature | -40…+120 °C (intermittent up to +135 °C); water-based fluids -40…+70 °C; water 0…+70 °C |
| Tube | synthetic rubber, extruded in one piece without joints |
| Reinforcement | 1 steel wire braid |
| Cover | synthetic rubber resistant to abrasion, oils, fuels and weather |
| Fluids | mineral and biological oils, water-glycol, water, lubricants |
| Ferrule | HAGRIX H001C-05 (no-skive) |
Applications
- agricultural machinery and tractors
- forklifts and material handling equipment
- construction machinery, e.g. excavators
- cranes and hydraulic booms
- pressure and return lines in power hydraulics
Crimping
Use the HAGRIX H001C-05 ferrule – a no-skive ferrule for 5/16" hoses. The outer cover does not need to be removed before crimping, which shortens assembly time.
What the code 1SC0500HAG means
- 1SC – compact hose with 1 steel wire braid
- 05 – inside diameter 5/16" (8 mm)
- 0 – standard version (no product name)
- 0 – standard wrapped cover
- HAG – HAGRIX brand
Frequently asked questions
Can a 1SC hose replace a 1SN DN08 hose?
In terms of working pressure, yes – both are rated at 215 bar. The 1SC hose has a smaller bend radius (55 mm instead of 115 mm), so it performs better in tight installations. Always match the ferrule to the hose type – for 1SC0500HAG use H001C-05.
Can the hose be used for water?
Yes, at temperatures from 0 to +70 °C. For water-based fluids (e.g. water-glycol) the range is -40…+70 °C.
When should I choose a 2SC hose instead of 1SC in size DN08?
The single-braid 1SC0500HAG hose is rated at 215 bar. If the system needs higher pressure, choose the two-braid 2SC0500HAG hose: 350 bar with a bend radius of 55 mm. Both use the same H001C-05 ferrule.
Substitutes
