B2B HYDRO
About products (32)

Blog News

Gemels GSJ swivel joints: how to stop hydraulic hose twisting at up to 420 bar

Gemels GSJ swivel joints: how to stop hydraulic hose twisting at up to 420 bar A hydraulic swivel joint lets one side of a connection rotate relative to the other while pressurised oil flows through it. The Gemels GSJ series is rated up to 420 bar, uses a patent-pending ball-free design and delivers low operating torque under pressure. The problem: a twisted hose fails sooner On a harvester head, a grapple rotator or a crane boom, hydraulic hoses are constantly twisted, bent and jer

18/10/2026

~ 3 Read time

Hydraulic Oil Coolers – Air and Water Cooling Systems

Hydraulic Oil Coolers – Air and Water Cooling Systems Hydraulic oil temperature has a direct impact on the efficiency and service life of every hydraulic system. Excessive oil temperature accelerates oil degradation, increases wear of pumps, valves, cylinders and seals, and may lead to reduced performance and costly machine downtime. A properly selected hydraulic oil cooler maintains the correct operating temperature, extends component life and improves the reliability of hydra

05/08/2026

~ 1 Read time

GEMELS – DNV Marine Certification 2025–2027 for Offshore Applications

What does DNV certification actually mean? GEMELS has once again obtained DNV Marine certification for 2025–2027, covering both carbon steel and stainless steel solutions. This is not just a formality. DNV confirms: compliance with strict marine standards, verified material quality, safety in offshore environments. Why marine hydraulics is different Operating conditions include: corrosion (salt, humidity), constant vibration, high pressure, zero tolerance for fa

12/06/2026

#Gemels #offshore

~ 1 Read time

Hydraulic quick couplings for agriculture – how to reduce leaks, contamination and downtime in the field

In agriculture, equipment changeovers often have to be carried out directly in the field. Machines work in dust, mud, under load and under time pressure. In these conditions, disconnecting and reconnecting hydraulic lines can create several real problems at once: oil leakage, system contamination, difficult reconnection and unnecessary downtime. This matters not only for the machine itself. In practice, it also means protecting the soil, improving operator safety and maintaining equip

09/06/2026

#agriculture

~ 2 Read time

Two-speed hand pumps – when they outperform single-speed hydraulic pumps

Two-speed hand pumps – when they outperform single-speed hydraulic pumps In hydraulic systems, a hand pump is not always just a source of pressure. In many applications, something more is required: a fast cylinder approach followed by high-pressure work under load. This is exactly where two-speed hand pumps offer a clear advantage over single-speed designs. HV Hydraulic two-speed hand pumps, including PM2V5-80 and PM2V5-50, were developed to reduce cycle time, lower operator e

22/05/2026

#HV Hydraulic #hand pumps

~ 3 Read time

Valves for hydrogen applications – what H2 service really requires from industrial valves

Valves for hydrogen applications – what H2 service really requires from industrial valves Hydrogen is no longer a future concept. H2 infrastructure is already being installed in fueling stations, compressor systems and distribution networks. As these installations expand, the requirements for valve technology become much stricter. In this kind of system, a valve cannot be treated as just another high-pressure component. It has to be designed specifically for hydrogen service. T

21/05/2026

#hydrogen #ball valves #industrial valves

~ 3 Read time

When to use ceramic grease in hydraulic systems – ceramic grease for high-temperature and anti-seize applications

When to use ceramic grease in hydraulic systems In hydraulic systems, not every grease solves the same problem. This is one of the most common selection mistakes. One product is used for bearings, another for seals, and another for threaded connections exposed to high temperature, moisture, and heavy load. This last group is where ceramic grease makes sense. A ceramic grease such as CX80 Keramicx is not a universal product for every lubrication point. Its role is not classic lubricat

21/05/2026

#hydraulic systems #high temperature

~ 4 Read time

Accumulator safety valve block – when to choose manual drainage and when to use a solenoid version

Accumulator safety valve block – when to choose manual drainage and when to use a solenoid version A hydraulic accumulator is not just an energy storage component. It operates under pressure and, by definition, requires safe isolation, controlled drainage, and protection against overpressure. That is why a properly designed system needs more than just the accumulator itself. It also needs a safety valve block. A safety valve block for hydraulic accumulators combines several fun

20/05/2026

#hydraulic accumulators #safety valves

~ 4 Read time

Stainless steel hose fittings and ferrules – when to choose AISI 316 and AISI 316L

Stainless steel hose fittings and ferrules – when AISI 316 is the right choice In many applications, standard zinc-plated carbon steel hose fittings are simply not enough. The problem usually does not appear in the catalog. It appears later during operation: corrosion, poorer appearance, weakened components, and shorter service life of the hose assembly. Where the hose works in an aggressive environment, the material of the fittings and ferrules matters. Our range includes fitt

20/05/2026

#AISI 316

~ 5 Read time

BLB flow dividers and regulators – how to split oil flow in a hydraulic system

BLB flow dividers and regulators – how to split oil flow in a hydraulic system In a hydraulic system, it is often not enough to simply supply oil to two receivers. In real applications, one function usually has to be supplied first, while the second can operate only with the remaining flow. This is exactly where BLB flow dividers and regulators are used. This is not an optional add-on. It is a functional component that organizes how the hydraulic circuit works. It helps maintai

19/05/2026

~ 3 Read time

How to Select a Hydraulic Hose – Practical Checklist

Checklist 1. Working pressure Check: nominal pressure pressure peaks Rule: → always include safety margin (1.5–2x) 2. Temperature Consider: fluid temperature ambient temperature 3. Medium compatibility Check: oil water chemicals Wrong choice = failure 4. Bending radius Too tight: flow restriction stress premature failure 5. External conditions Check: abrasion impact environment 6. Movement and vibration Dynamic systems require:

18/05/2026

#hose maintenance #hydraulics

~ 1 Read time

IMM Hydraulics Hoses – Solutions for High-Pressure Hydraulic Systems

Where do hydraulic hose failures really come from? In hydraulic systems, hoses are one of the most common failure points. Typical issues: pressure loss, downtime, system inefficiency. The real problem is not availability, but incorrect hose selection. IMM Hydraulics – designed for demanding conditions IMM Hydraulics (Interpump Fluid Solutions) hoses are engineered for: high-pressure operation, intensive duty cycles, harsh environments. Applications include:

17/05/2026

~ 1 Read time